Flood Damage from Deteriorating Washing Machine Hoses
Flood damage from a washing machine is one of the top five causes of home insurance claims
Most homeowners protect their homes against things such as storms, fire, and burglary, but water damage from malfunctioning or leaking home appliances often gets overlooked, especially when it comes to washing machines.
It seems unlikely, but flood damage from a washing machine is one of the top five causes of home insurance claims. More than half of these claims is from supply hoses which have burst or leaked, so make sure your Jacksonville home is prepared for such an event. Always have the number of a reputable restoration company handy, like SERVPRO, who is experienced in all kinds of flood damage.
Most washing machine hoses fail eventually over time, even when they have been installed properly. They can cause leaks or even catastrophic flooding when they burst. Failure can be due to several things such as installation error, age, poor design and poor-quality materials. Most of these hoses are made of reinforced polymer or rubber. The materials lose resiliency as they age, making them susceptible to leaks, cracks, and bursting.
Many times, fittings and hoses that connect your washing machine to the water source are visible and easy to inspect each time you use the machine. If they are not visible, figure out how to gain access to them so you can inspect them once per month. Look at both the cold and hot water lines. Failures happen near the connection where the hose usually bends. Keep an eye out for:
Signs Of Imminent Failure
Obvious evidence of imminent failure or deterioration should be looked for, such as bulges, blisters, unraveling, cracks, kinks, discoloration, or crimps, especially close to the connections and turns in the hose.
Look for drops, moisture, rust, leaks on, in, or around the connections or hoses or in a catch pan, or discoloration. Look at the connects to ensure they are properly tightened. Even a small leak can lead to imminent failure.
Ensure the washing machine is located four inches at least from the connections, so the hose is not kinked or bent. Make sure the machine is balanced properly, so it is not “walking” when in use, which puts added stress on connections and hoses.
Lastly, aging or damaged hoses should be replaced right away, and make sure that the hoses are properly installed. Knowing where the shut-off valve is as well is important if a hose does fail. Then get in touch in SERVPRO right away so they can help you clean up the flood damage and dry out your home.